Capture-Jul-16-2025-04-50-23-0814-PM

Just because winter’s over doesn’t mean the job is done. Properly maintaining and storing your BOSS salt spreaders and liquid systems ensures they’re ready to go when the temperatures drop again.

Whether you’re using a VBX+, TGS, EXACT PATH, Forge, QuickCube, or a VSI Series Liquid System, follow these simple steps to extend the life of your investment. 

 

  1. Clean the Hopper or Tank

Thorough cleaning prevents corrosion and product buildup.

For Spreaders:

  • Empty all material from the hopper.
  • Wash thoroughly with warm, soapy water.
  • Scrub the inside walls and spinner areas.

For Liquid Systems (VSI Genesis or Legacy):

  • Drain tanks completely.
  • Rinse with clean water to flush residue.
  • Run clean water through pumps and plumbing.

 

  1. Inspect Components

Look for signs of wear before storing:

  • Check spinner blades and drive motors.
  • Inspect chains, augers, and pintle systems for damage or tight spots.
  • Examine tanks and hoses for cracks, leaks, or buildup.
  • Inspect wiring harnesses and connectors for corrosion or fraying. 

  1. Service Moving Parts

Spreaders and liquid units need light servicing after a season’s use:

  • Grease fittings, bearings, and any pivot points.
  • Lubricate spinner motor shaft (especially on VBX+, TGS, and Forge).
  • On VSI systems, check pump filters and flush nozzles with clean water.

 

  1. Protect the Electrical System

Keep electronics safe during storage:

  • Disconnect and clean all electrical connections.
  • Apply dielectric grease to prevent moisture damage.
  • Remove control boxes and store indoors in a clean, dry location.

 

5. Store It Properly

Whether it's a tailgate spreader or a full liquid system:

  • Cover or store units indoors to protect from UV rays and moisture.
  • Elevate off the ground to avoid flat spots on frames or wheels.
  • Drain all remaining liquids to prevent freezing or residue issues.
  • Store control panels and harnesses labeled for easy access next season.

 

Ice control starts with off-season control.
Take care of your spreaders and sprayers now — and they’ll return the favor when winter rolls back around.



Leave a Reply