Truck Controller-104A5665

BOSS SmartTouch2 Controllers

Our high-tech SmartTouch2 ergonomic controller features large, backlit buttons for a user-friendly experience with straight-blade, V-blade, DRAG PRO, and EXT plows. Explore the features of both V-blade and straight-blade controllers and learn how to use them effectively.

Watch the video below and read on to become proficient with your BOSS SmartTouch2 controller.

2024-CanAm UTV Plow-104A2077

V-Plow SmartTouch2 Controller

raise--1

RAISE

Press the center button up twice to raise the blade, or hold it up until the blade is fully raised.

lower--1

LOWER

Press the center button down twice to lower the blade, or hold it down until the blade is fully lowered.

float--1

FLOAT

Press the center button down twice quickly to activate the FLOAT feature (the center LED will turn red). Alternatively, hold the center button down for 2 seconds.

scoop--1

SCOOP

Create the Scoop shape by pressing both left and right wing out buttons simultaneously until the blades are fully extended.

left--1

ANGLE LEFT

To plow snow to the left, press and hold both the left wing out and left wing in buttons simultaneously until the blades are fully angled.

right-1

ANGLE RIGHT

To plow snow to the right, simultaneously press and hold the right wing out and right wing in buttons until the blades are fully angled.

vee--1

VEE

To create the Vee shape with the plow blades, press both the left and right wing in buttons at the same time until the blades are fully retracted.

sleep-1

SLEEP MODE

If the controller is ON but inactive for 20 minutes, it will enter automatic sleep mode. Reset the controller by turning it off and then on again.

Straight Blade SmartTouch2 Controller

raise--1

RAISE

Quickly press the center button up twice to raise the plow blade. Alternatively, hold the center button up until the blade is fully raised.

lower--1

LOWER

Quickly press the center button down twice to lower the plow blade. Alternatively, hold the center button down until the blade is fully lowered.

float--1

FLOAT

The plow activates the FLOAT feature when you quickly press the center button downward twice (the center LED turns RED). Alternatively, hold the center button downward for 2 seconds to activate FLOAT.

left-str8-1

ANGLE LEFT

To angle your snow plow to the left, use your thumb to push the left button until the plow is fully angled.

right-str8-1

ANGLE RIGHT

To angle your snow plow to the right, use your thumb to push the right button until the plow is fully angled.

sleep-1

SLEEP MODE

If the controller is ON but inactive for 20 minutes, it will enter automatic sleep mode. Reset the controller by turning it off and on again.

BOSS Joystick Controllers

Joystick controllers provide versatile right- or left-hand adjustments and are compatible with straight-blade and V-blade plows. The Module Adapter and V-Blade Joystick Control Kit are required for EXT Joystick Control.

Watch the video below and read on to learn how to use your BOSS Joystick Controller.

joystickcontrol-1

Straight Blade Joystick Controller

black-boss-o

VEE

To create the Vee shape with the plow, move both wings in and pull the joystick backward.

Red-BOSS-O

LEFT & RIGHT WING OUT

To move the left plow wing out, push the joystick diagonally left and backward. To move the right plow wing out, push the joystick diagonally right and backward.

black-boss-o

ANGLE LEFT & RIGHT

To angle the entire plow left, move the right wing out, the left wing in, and push the joystick left. To angle the entire plow right, move the right wing in, the left wing out, and push the joystick right.

Red-BOSS-O

RAISE/LOWER

Move the joystick up to raise and down to lower the plow. Note: You can rotate the Raise/Lower switch for right or left-hand operation by pulling up the joystick and rotating it to the desired position.

black-boss-o

SCOOP

To create the scoop shape with the plow, extend both wings out and push the joystick forward.

Red-BOSS-O

FLOAT

To activate the Float feature, press the Raise/Lower switch down until it clicks into place. This allows the plow blade to follow the ground contour. The switch remains in the Float position until pressed up again.

Straight Blade Joystick Controller

black-boss-o

RAISE & LOWER

Pull the joystick back to raise the plow blade. Push the joystick forward to lower the plow blade.

Red-BOSS-O

ANGLE LEFT & RIGHT

Push the joystick left to angle the plow blade left. Push the joystick right to angle the plow blade right.

black-boss-o

FLOAT

To activate the Float feature, push the joystick forward until it clicks into place, allowing the plow blade to follow the ground contour. The joystick remains in the Float position until centered again.

remotes-2-1

View all BOSS Truck Equipment Controllers now!