How to Maintain and Store Your BOSS After Winter

Your BOSS plow works hard all winter — make sure it’s ready to do it again next year. From the DXT to the HTX and Box Plows, proper maintenance and off-season storage help extend the life of your equipment and prevent headaches next season.

1. Wash It Down

Give your plow a deep clean to remove road salt, grime, and build-up.

• Use low-pressure water and mild soap
• Focus on pivot points, cutting edges, and undercarriages
• Dry thoroughly to prevent rust

Tip: Avoid pressure washers near electrical connections.

2. Inspect for Wear and Damage

Look over your plow for signs of wear or damage:

• Cracked welds or bent frames
• Loose hardware or worn cutting edges
• Hydraulic leaks or damaged hoses

Check V-plows (like DXT, TEV, XT) for hinge wear and wing damage. Trip-edge and expanding plows (EXT, Drag Pro) may need closer inspection at pivot points.

3. Service Hydraulics & Electrical Connections

Hydraulic and electrical systems need special attention:

• Lower the plow to release hydraulic pressure
• Inspect lines and cylinders for wear or leaks
• Apply dielectric grease to all connectors
• Disconnect and store the controller indoors

4. Lubricate Moving Parts

Proper lubrication prevents rust and keeps components functioning:

• Grease pivot pins, hinges, and lift frames
• Lubricate expansion joints on EXT and Box Plows
• Apply protective coating to exposed cylinders
  
  

5. Store It Right

Protect your plow while it rests:

• Elevate off the ground using wood blocks
• Cover with a breathable tarp or store indoors
• Label and store all accessories and controllers
  
  

Final Tip: Book a Pre-Season Inspection

Before the first snow flies again, have your plow checked by a certified BOSS Dealer. They’ll ensure your equipment is good to go — no delays, no surprises.

Maintain now. Dominate later.